![Failure to obtain a verilog simulation license](https://kumkoniak.com/6.jpg)
![failure to obtain a verilog simulation license failure to obtain a verilog simulation license](https://d2vlcm61l7u1fs.cloudfront.net/media/63c/63c1e098-bb4a-4ec5-8dac-58b1bc6427a0/phpB2weix.png)
- Failure to obtain a verilog simulation license how to#
- Failure to obtain a verilog simulation license software#
In this tutorial, as an example, an 8-Bit Simple up counter will be created as shown in Figure 5.įigure 5. The next step is to start writing SystemVerilog code in the text editor. Left: The project tab shows the new file. This will open ModelSim’s text editor as shown in Figure 4-right.įigure 4. To start writing the SystemVerilog code right-click on the file and select Edit as shown in Figure 4-left. Now you will notice that the file was added to the project, and its status is “ ?”. Create a new SystemVerilog file 2.2 Write a SystemVerilog file Fill in the file name, which should reflect the function of the module, and select the type of the file to be SystemVerilog as shown in Figure 3-right. By selecting “Create New File”, a new widow named “Create Project File” will open. Project Location = Browse to the working directory created in section 1.1Īfter clicking “OK”, a new window will open to add a new item to the project as shown in Figure 3-left. In the Create Project window set the fields as follows and as shown in Figure 2: This will open a “Create Project” window. 2.1 Create a new projectįrom the drop-down menus go to New –> Project…>.
Failure to obtain a verilog simulation license how to#
The objective of this section is to learn how to create a new project, deal with ModelSim’s text editor, and compile the created code. ModelSim initial screen 2 Create and compile SystemVerilog modules ModelSim should open a window as in Figure 1.įigure 1. > source /CMC/scripts/mentor.modelsim.10.3.csh After sourcing the setup file, launch the tool. Sourcing this file will take care of all the needed environment variables/licensing. In the working directory that you just created, source the provided setup file. 1.2 Source the setup file and run ModelSim Note: You will need to do this step for only the first time using the tool.
![failure to obtain a verilog simulation license failure to obtain a verilog simulation license](https://www.tina.com/English/tina/wp-content/uploads/2019/03/Verilog-example.jpg)
Create a new working directory for ModelSim and name it, then descend into that directory using the following command lines: > mkdir ModelSim_ StudentNumber In your home directory, open a new shell.
![failure to obtain a verilog simulation license failure to obtain a verilog simulation license](https://www.simplistechnologies.com/sites/default/files/styles/max_1300x1300/public/2016-03/simplis-vh-schematic.png)
The objective of this section is to learn how to get the environment ready for the tool, take care of the licensing issues, and start the tool. 1 Environment Setup and starting ModelSim
Failure to obtain a verilog simulation license software#
ModelSim is an HDL simulation software from Mentor Graphics. ~ Ajith S Ramani and Abdelrahman 10/2016 ~
![Failure to obtain a verilog simulation license](https://kumkoniak.com/6.jpg)